The NELSKAMP MS 5 PV tile has been specially developed for photovoltaic modules. It is a hard, extremely weather and frost-resistant, and regarded in the industry as an innovative tile roofing for discerning roof architectures.
The MS 5 is made of a ceramic material and has a water absorption rate of less than 3%, which gives it an extremely long service life.
In contrast to frame-mounted photovoltaic systems, the NELSKAMP MS 5 PV and MS 5 2Power systems are harmoniously assimilated into the roof. As a result the roof surface is homogeneous, and it also offers impressive storm and rain protection.
With the MS 5 PV, the tile is the dominant element in the roof design.
- High economic efficiency
- Rain and storm-proof installation
- Preservation of the roof aesthetics
- Integrated on the roof tile
- Warranty on the rated output: 10 years 90% / 25 years 80%
- Product warranty: 10 years
Sophisticated technology, simple installation
The large-format Nibra MS 5 roof tile has been specifically optimised to accommodate the PV modules for quick and easy installation. After laying the tiles, the roofer then installs the photovoltaic modules. The module’s top profile rail is pushed into the tile’s ceramic groove and fastened to the bottom of the tile with black stainless steel double brackets and two screws. The system is then connected to the mains power supply by the electrician.
All modules are fitted with a special frame that matches the aged colours of the engobed tile. The cables run safely under the roof covering.
Aesthetic solar energy roofs
The innovative mounting system gives your roof a composed and harmonious appearance. The tile is still the roof's main design element. With the MS 5 PV system (in contrast to conventional systems) the roof retains its characteristic appearance.
High energy yield
Even diffuse light is sufficient for the monocrystalline PV cells to generate electricity because they have a particularly high efficiency of 18.3%. As a result, the MS 5 PV also offers excellent value for money.
Colours & Surfaces
altfarben engobiert | aged colour, engobed | couleurs anciennes engobées
naturrot | natural red | rouge nature
Photovoltaik-Modul | Photovoltaic module | Module photovoltaïque
Detailed information about the tile can be found here:
|Type of cell||monocrystalline 6"+|
|Module output Pmax||100 Wp -0 / +5 Wp|
|Rated working current Im||8,20 A|
|No load voltage Voc||15,20 V|
|Short circuit current Isc||8,80 A|
|Max. working voltage Vmp||12,20 V|
|Max. system voltage||1000 V|
|Temperature coefficient Pm||- 0,430%/°C|
|Temperature coefficient Voc||- 0,340%/°C|
|Temperature coefficient Isc||0,050%/°C|
|Hail resistance acc. to||IEC 61215|
|Cell efficiency||18,3 %|
|Weight of module||ca. 9,5 kg|
|1 kWp||10 modules|
|Module size||1965 x 399 mm|
|Solar cables||2 x 4,0 mm², length 1200 mm|
|Space requirement||approx. 10 m² per 1 kWp|
|Subject to change without notice.|