Planum PV for the flat concrete tile Planum

Objektstandort: NiederlandeObjektstandort: Niederlande

SOLAR TILE PLANUM PV

Do you want a new roof covering with a modern design, sustainability, and a profitable technology? The Planum PV system combines all three, and is hardly noticeable on the roof. The overlapping Planum PV modules, like the smooth tiles, lie directly on the roof lathing for a uniform and even overall appearance.

Product Benefits

The Planum PV module is supplied as a ready-to-install unit with the interlocking Planum tile seam at the side ends for easy, quick and safe installation. The variable overlap area permits a uniform roof layout, while the prefabricated cables with MC4 plugs allow for safe and simple connection of the powerful modules, which cover ca. 0,5m² of roof area.

  • Modules interlock with the roof tile Planum
  • Delivered as a ready to install unit
  • Hanging nib and side interlock for swift, easy and secure laying
  • Only 3 screws per module
  • 15mm variable cover length
  • Ca. 5.5m² roof area per kWp
  • Ca. 180Wp/m² roof area
  • Also available as a 60cm wide module allowing for max. roof area usage
  • Product guarantee: 10 years
  • Performance guarantee:
  • 10 years 90 % of rated performance
  • 25 years 80 % of rated performance
 

Colours & Surfaces

 

Gallery

 

Technical Data

Module performance Pmax 93 Wp
Rated working current Im 9,17 A
No-load working voltage Voc 12,25 V
Short circuit current Isc 9,63 A
Maximum voltage Vmp 10,14 V
Maximum tested system voltage 1000 V
Recommended system voltage up to ca. 600 V
Temperature coeffizient Voc -0,30 %/°C
Temperature coeffizient Isc +0,06 %/°C
Temperature coeffizient Pmpp -0,39 %/°C
Hail resistance according to IEC 61215 + IEC 61730
Cell efficiency 22,1 %
Module weight 8,5 kg
Module measures

cover width 5 tiles ca. 1500mm
cover length 325 mm - 340 mm

Roof pitch

≥ 25°
(20° - 24° on request)

Plugs MC4
Module cable 2 x 4,0 mm2 je 550 mm long
22.03.2023 · technical information subject to change